The NMEA data port provides the connection to your chart plotter and consists of four wires colour coded as shown in the table below and in Figure 8. The antenna should not be co-located or operated in conjunction with any other transmitting antenna. This product has been engineered to offer you the highest level of performance and durability and we hope that it will provide many years of reliable service. Check that the connections to the chart plotter are correct. Do not install this equipment in a flammable atmosphere such as in an engine room or near to fuel tanks. Once the unit has been installed it is ready for use. Before beginning installation of your AIS RX, please ensure you have the necessary additional items as detailed in section 3.
|Date Added:||18 May 2017|
|File Size:||29.4 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Connect the red wire to the power supply positive terminal.
The following sections give a aiw overview of each item. AIS receivers will generally receive transmissions from class A transceivers, class B transceivers, AtoNs and AIS base stations but do not transmit any information about the vessel on which they are installed.
You may also need to enable the display of AIS targets in the chart options. If your VHF antenna does not use this type of connector please contact your dealer for details rs-100 available adaptors.
advanSea Rx Dual Channel Ais Receiver | eBay
Please ensure all items are present and if any of the items are not present contact your dealer. VHF antenna Installation 3. Do not install this equipment in a flammable atmosphere such as in an engine room or near to fuel tanks.
Rc-100 addition to the items provided with your AIS RX the following items will be required for installation: There are a number of types of AIS device as follows: Rx-1100 take note of the warnings in section 1 regarding the use of antennas. Please refer to Figure 6 for guidance.
Class A transceivers are mandatory on all vessels over gross tonnes on international voyages and certain types of passenger vessels under the SOLAS mandate. Thank you for buying this AIS receiver. The NMEA input baud rate is baud.
Before beginning installation of your AIS RX, please ensure you have the necessary additional items as detailed in section 3. Dx-100 are similar to class B transceivers, but are designed to be fitted to large vessels such as cargo ships and large passenger vessels.
These are important messages for safety, installation and usage of the product. Connecting an optional NMEA device Wire colour NMEA function Please note that the ‘Receive’ connections should not be connected to your chart plotter as it is not normal for the receiver to receive data from the chart plotter. R-100 refer to section 3. This equipment must be installed and operated according to the instructions contained in this manual.
It’s a community-based project which helps to repair anything. This equipment is intended as an aid to navigation and is not a replacement for proper navigational judgement. If it is not sufficient you will need an extension cable. The NMEA data port provides the connection to your chart plotter and consists of four wires colour coded as shown in the table below and in Figure 8.
If you are using charting software running on a PC, please refer to the instructions provided with your chart plotting software for details of how to configure it to display AIS information. Compass safe distance 1. The use of ScotchlokTM connectors is recommended for this purpose. Means of connecting the cables together will also be required.
RF emissions notice The compass safe distance of this unit is 0. Accuracy of this manual Every effort has been made to ensure the packaging for this product is recyclable. The port operates at baud.
Advansea AIS RX-100
Disposal of this product and packaging! Step 1 – Installing the AIS RX The following sections explain the installation process step by step for each of the main elements of the system. Please take the time to sis yourself with the system elements and their connections prior to attempting installation.